The Smart Battery Monitor is a universal system that provides detailed battery performance data and can be added to existing setups. For accurate monitoring, it should be installed close to the battery bank, away from heat and weather exposure, with secure connections and correctly sized cables to reduce voltage drop. Programming must match the battery type and capacity, and wiring guides are available to support different applications.
REDARC recommends seeking the support of a qualified auto electrician or technician.
Important
For your safety, REDARC recommends installation by a qualified auto electrician or technician. Our trusted REDNetwork is made up of professional auto electrical businesses certified by REDARC to install the complete of REDARC solutions. Find Your Local Installer
This information is applicable for the following products:
- Smart Battery Monitor (BSEN500)
The Smart Battery Monitor is a universal battery monitoring system that can be installed to supplement an existing setup, providing detailed information on battery vitals. When installing a Smart Battery Monitor in various power solutions, it’s crucial to ensure proper installation and programming to accurately measure the battery’s performance. Start by choosing an installation location close to the battery bank but away from heat sources and protected from the elements. Make sure all connections are secure and use cables of the appropriate size to minimize voltage drop. Program the monitor according to the specific battery type and capacity.
Below are four examples wiring guides designed to suit various applications.
Smart Battery Monitor installations with RedVision
Smart Battery Monitor installations with Manager Alpha
Smart Battery Monitor installations with a stand-alone system with two auxiliary batteries
Smart Battery Monitor installations with a lithium (LiFePO4) battery with Anderson plug
