This article will assist with selecting the right Tow-Pro wiring kit.
TPWKIT-012: Vehicle-specific kit for 2018+ Ford Ranger/Everest with Autonomous Emergency Braking (AEB). Backward compatible with pre-2018 models and other Ford vehicles with AEB.
TPWKIT-013: Universal kit for vehicles where the start battery and Tow-Pro are on the same side.
TPWKIT-014: Universal kit for vehicles where the start battery is on the opposite side (includes a longer power harness).
If unsure between 013 and 014, choose 014 for extra cable length.
Important
For your safety, REDARC recommends installation by a qualified auto electrician or technician. Our trusted REDNetwork is made up of professional auto electrical businesses certified by REDARC to install the complete of REDARC solutions. Find Your Local Installer
REDARC provide one vehicle specific wiring kit for 2018+ Ford Ranger/Everest to suit the Tow-Pro Elite Electric Brake Controller and two universal wiring kit options to support other vehicle applications.
This information is applicable to the following Tow-Pro Electric Brake Controllers:
- Tow-Pro Elite V2 (EBRH-ACCV2)
- Tow-Pro Elite V3 (EBRH-ACCV3)
For assistance on choosing the right Tow-Pro Wiring Kit for your vehicle, check out our handy video guide below or keep reading.
What's the difference between the two universal wiring kits?
TPWKIT-013: Suitable for vehicles where the start battery, Tow-Pro and cables are on the same side.
TPWKIT-014: Suitable for vehicle where the start battery is on the other side of the vehicle from the rest of the installation.
The difference between the TPWKIT-013 and the TPWKIT-014 is the 014 kit comes with a longer power harness for the increased cable run to the start battery. If you are unsure, purchasing the TPWKIT-014 will give you more cable to work with in your installation.
What wiring kit do I use for 2018+ Ford Ranger/Everest?
Post 2018 (MY19) Ford released Autonomous Emergency Braking (AEB) Technology for many of their vehicle ranges. Due to the sophisticated Trailer Modules in these model vehicles, the common connections for the brake signal to the electric brake controllers are now not viable without adverse effects on the vehicle and onboard safety systems.
REDARC has engineered a solution to overcome this issue and designed a vehicle specific Tow-Pro Wiring Kit (TPWKIT-012) to suit this application.
What wiring kit do I use for a pre 2018 Ford Ranger?
Although The TPWKIT-012 is a requirement for 2018+ Ford Ranger and Everest with AEB, this kit is also backward compatible. Meaning it is suitable for all earlier models without AEB and other Ford vehicles with AEB.