Important
For your safety, REDARC recommends installation by a qualified auto electrician or technician. Our trusted REDNetwork is made up of professional auto electrical businesses certified by REDARC to install the complete of REDARC solutions. Find Your Local Installer
This information is applicable to the following products:
- G52-VA
- G52-VWA
I cannot get the relay output feature to work.
The G52-VA and G52-VWA gauges are not equipped with a relay output feature. All other gauges within the range include this feature.
Can I re-program the alert levels on my voltage gauge?
No - the alert levels are programmed when manufactured. The G52-VA will trigger at 9 & 16V and the G52-VWA at 11 & 16V.
I cannot get the 'peak hold' feature to work.
The G52-VA and G52-VWA gauges are not equipped with the peak hold feature. All other gauges within the range include this feature.
This information is applicable to the following products:
- G52-VA
Why is the centre ring is flashing?
The “Master battery” setting should be set to ‘none’.